31HP / 999cc / KW FX921v 14cc PARKER HTG 60"Fab Deck-Triple 7
- 3-year limited commercial warranty (no hour limitations)
- 31 HP Kawasaki FX921v (999cc) engine and 14cc Parker HTG transmission
- 60” triple-7-gauge fabricated steel cutting deck with top, bottom and side reinforcements
MAKES A HARD DAY’S WORK EASY
The biggest challenges are no match for the advanced power of the PRO Z 700 S Series. Heavy-duty construction, faster mowing speeds and a larger deck option make this an essential step up for large crews working on extensive jobs.
COVER MORE GROUND
The Cub Cadet steering wheel zero-turn covers every acre 10% faster than comparable lap bar units. Cut down job time even more by upgrading to our biggest 72˝ cutting deck.
POWERED TO MEET ANY DEMANDS
Tackle the tough jobs with high-performance Kawasaki® engines and commercial-grade 14cc transmissions, offering ground speeds up to 12 mph without compromising cut quality.
STRONG COMES STANDARD
Overcome any obstacle with the triple-7-gauge steel cutting deck. The 7-gauge deck shell, 7-gauge top and bottom reinforcements, ¼˝ leading edge and 5/16˝ side reinforcements are the best in the industry.
WORK SHOULDN’T BE THIS COMFORTABLE
Ride in comfort on our standard ISO suspension seat with lumbar support, padded armrests and a roomy operator station. Easily adjust the 15-position deck lift system for the perfect cut.
Specifications
MOWER DECK
BLADE-TIP SPEED (APPROX)
18,500 fpm
BOTTOM REINFORCEMENT
7ga. (.187") bottom plate
ROLLED LEADING EDGE REINFORCEMENT
1/4" (.250") steel
SIDE CONSTRUCTION
5/16"(.313) steel on trim and discharge sides
SPINDLE COVERS
Steel – Tooless Quick Release
TOP REINFORCEMENT(S)
7ga. (.187") top plate
7ga. bottom reinforcement
¼” rolled leading edge
3/4" Thick UHMW-PE Replaceable Trim-side Wear Guard
DECK MATERIAL
fabricated 7ga. (.187”) steel shell
ANTI-SCALPING
2 Front HD w/ Bushings & Grease Zerk
DECK BLADES
Triple
DECK HEIGHT ADJUSTMENT
Foot pedal with spring assist
16 Positions
DECK SIZE/TYPE
60" FABRICATED DECK
DECK STYLE/CONSTRUCTION
7ga. top plate
7ga. bottom reinforcement
¼” rolled leading edge
DISCHARGE CHUTE
Heavy-duty Flex chute (impact resistant)
CUTTING HEIGHT
1" - 5"
GENERAL
CRUISE CONTROL
N/A
CUP HOLDER
Integrated into Side Pod
FRONT TIRES
13" x 6.5" - 6" (smooth
FRAME
Fully welded, full-length 3/8 x 5" laser cut steel / integrated tie-down slots
FRONT AXLE / YOLKS
2" x 3" solid axle tube with ISO dampening suspension and 1/2" thick steel front yokes
LENGTH / WIDTH / HEIGHT*DISCHARGE CHUTE UP WIDTH*ROP'S UP HEIGHT
80" L x 50" W x 58" H
PTO CLUTCH
Warner PTO Clutch (200 ft. lb.)
PARK BRAKE / BRAKING
Hand-operated lever with integrated hydro pump release lever
ROPS
2"x2" Foldable 3 Position Low Profile Clearance
REAR BUMPER
5/16" Thick Steel rear engine guard/pre-drilled mounting points for attachments with integrated rear hitch
REAR TIRES
24" x 12" - 12" (Turf Tread)
SEAT TYPE
High-back dial suspension with EVC cushion,
padded arm rests
ISO mounted base (lateral suspension)
angle back adjust and lumbar support
seat belt
THROTTLE/PTO/KEY SWITCH
HD Low-profile throttle lever, sealed key switch & electronic fingertip engagement pto
WEIGHT (APPROX)
1060 LBS.
HOUR METER
Standard electronic
SAFETY SYSTEMS
Operator presence
DRIVE SYSTEM
ENGINE TYPE
Kawasaki FX921v
FUEL CAPACITY
Twin 7.45 gal. tanks (14.9 gal. total) with electronic fuel gauge
HORSEPOWER / CC'S
31hp - 999cc
TRANSMISSION
Parker HTG 14cc pump
280cc wheel motor
GROUND SPEED
Fwd: 12 mph / Rev: 6 mph
DRIVE SYSTEM
LAP BAR / STEERING WHEEL ADJUSTMENT
3/4 length padded bars w/tooless quick adjust dial
LAP BAR / STEERING WHEEL CONTROL
High Performance & Speed Control
WARRANTY
3 year / no hour limit commercial warranty