INCREDIBLE MANEUVERABILITY AND CONFIDENCE
The first-of-its kind drive system of four-wheel steering with steering wheel control gives professionals a higher level of stability, precision and ease-of-use on any terrain. And by virtually eliminating turf damage, the PRO Z 100 S Series enhances your end results.
THE POWER OF KOHLER COMMERCIAL-GRADE ENGINES
The high-performance Kohler engine means greater torque, and the heavy-duty air filtration system ensures that it can consistently run at full throttle and extends engine life. That means you get incredible results at an incredible pace, year after year.
UNSURPASSED RESULTS OF THE CUB CADET SIGNATURE CUT™
The PRO Z 100 S Series features a sloped-nose, triple-blade floating fabricated deck. The 10-gauge reinforced leading edge, trim-side discharge opening and consistent blade tip speed evenly disperse grass clippings for pristine, professional-grade results.
- Commercial-grade 25 HP Kohler EFI engine
- 48-inch 10-gauge steel commercial deck with top, bottom and side reinforcements for added durability
- 12cc commercial-grade transmission ensures optimal blade tip speed and superior quality of cut at speeds up to 9.5 mph
Specifications
STEERING
Lap Bar / Steering Wheel Adjustment
Multi-position Quick-adjust steering column
CHASSIS
Rear Bumper
5/16" Thick Steel rear engine guard/pre-drilled mounting points for attachments with integrated rear hitch
ROPS
2" x 2" quick-latch tool-less foldable 3 position
Frame
Fully welded, full-length 12ga. channel frame with 14ga. reinforcements
Front Axle / Yolks
2" x 3" solid steel and 3/8" thick steel with sealed ball bearing front yolks
OPERATION
Throttle/PTO/Key Switch
HD Low-profile throttle lever, sealed key switch & electronic fingertip engagement pto
PTO Clutch
Warner Clutch - 125 ft lb.
Seat Type
High-back suspension with seat belt, adjustable arm rests and 6" seat travel
Lap Bar / Steering Wheel Control
High Performance Steering Wheel with Foot-pedal Control
Rear Tires
23" x 10.5" - 12" (Turf Master)
Front Tires
13" x 6.5" - 6" (turf tread)
Cruise Control
Standard - Foot operated pedal engagement
Park Brake / Braking
Foot-operated pedal
MOWER DECK
Spindle Construction
5" sealed cast aluminum housing (maintenance-free)
Deck Style/Construction
Floating, fabricated 10ga. (.135”) steel shell (e-coated)
Deck Blades
3 high-lift Marbain® blades / 18,500 fpm (approx.)
Bottom Reinforcement
7ga. (.175") steel
Deck Size/Type
48" Fabricated Deck
Deck Height Adjustment
Hand Lever / 15 position / spring assist
Discharge Chute
High-density, impact-resistant rubber
Top Reinforcement(s)
2ga. (.250") top plate
Trim-Side Wear Guard
3/4" Thick UHMW-PE Replaceable Trim-side Wear Guard
Side Construction
5/16"(.313) steel on trim and discharge sides
Leading Edge Reinforcement
1/4" (.250") steel
Cutting Height
1" - 5"
Anti-Scalping
2 Front HD w/ Bushings & Grease Zerk
GENERAL
Cup Holder
Integrated into Side Pod
Hour Meter
Standard electronic
WARRANTY
Warranty
2-year limited commercial warranty (no hour limitations) or 4-year/500-hour limited residential warranty
DIMENSIONS
Weight (approx.)
1000 lbs.
L / W / H with discharge chute UP and ROPs DOWN
80" L x 49" W x 48" H
ENGINE & DRIVE SYSTEM
Engine Type
Kohler Confidant EFI Closed Loop EZT-740
Horsepower / CC's
25hp - 747cc
Fuel Capacity
Twin tanks - 3.5-gallon ea. (7 gallon total) with oversized filler opening
Ground Speed
9.5mph fwd. / 4.5mph rev.
Transmission
12cc Hydro-Gear® ZT 3400 with charge pumps
