Specifications
General
Engine
Tires
Dimensions
Transmission
PTO
Hydraulic System
| Drive System | 4 Wheel Drive |
| Steering | Hydrostatic |
| Clutch | Dry, Single |
| Battery | 12V |
| Brake | Wet Disc |
| Model | A1700N2 |
| Type | Vertical, 4 Cycle, Water Cooled, Diesel, EPA TIER CERTIFIED |
| Combustion System | Swirl Chamber |
| Aspiration | Naturally |
| HP | 35 |
| RPMs | 2600 |
| No. of Cylinders | 3 |
| Bore x Stroke | 88 X 94 mm (3.46″ x 3.7″) |
| Displacement | 1714 cc |
| Compression Ratio | 21.3 :1 |
| Air Cleaner Type | Dry, Double Filter Elements |
| Fuel Capacity | 12 gal |
| Front Tread | 9.5×16 (AG20), 10×16.5 (IND20), |
| Rear Tread | 12.4×28 (AG20), 420/70×24 (IND20) |
| Overall Length | 130 in |
| Overall Width | 64 ~ 72 in |
| Height with ROPS | 98 in |
| Wheelbase | 70.9 in |
| Ground Clearance | 12.7 in |
| Weight | 4053 lbs |
| Type | Fully Synchronized (4 speed) |
| Gear Shifting (F&R) | F12 x R12 |
| Travel Speed (F&R) | (F) 1.14 ~ 20 / (R) 1.09 ~ 19.1 MPH |
| Type | Independent P.T.O. (6 spline shaft) |
| Speed | 540 / 790 RPM |
| Power | 29 HP |
| Type | Position |
| 3-Point Hitch | Category I / Telescopic lower link / telescopic stabilizers |
| Lift Capacity | 3306 lbs |
| Steering Pump Flow | 4.8 (7cc) |
| Main Pump Flow | 8.9 (13cc) |
Included Attachments
BL200 
Dig with Authority!
Branson Loaders are designed with the operator in mind. It is easy and quick to attach and detach them from the tractor. Loaders are powered by the tractors’ hydraulics, no need to struggle hooking up an auxiliary hydraulic pump.
Specifications
| Maximum Lift Height | 104 in |
| Clearance with Attachment Level | 95 in |
| Clearance with Attachment Dumped | 78.2 in |
| Reach at Maximum Height | 20.4 in |
| Reach with Attachment on Ground | 67 in |
| Maximum Dump Angle | 46 degrees |
| Attachment Rollback Angle | 35 degrees |
| Digging Depth Below Grade | 1.8 in |
| Overall Height in Carry Position | 52.4 in |
| Depth of Attachment (to back of inner shelf) | 20.9 in |
| Height of Attachment | 20.9 in |
| Depth of Attachment (to pivot pin) | 19.6 in |
| Lift Capacity to Full Height @ Pivot Pins | 2701 lbs |
| Breakout Force | 3660 lbs |
| Relief Valve Setting (loader control valve) | 2532 psi |
| Lift Cylinders | 2.2 x 1.2 in |
| Bucket Cylinder | 2 x 1.2 in |
| Bucket Specification | 50 in |