Branson 4815H Compact Tractor & Front Loader
Specifications
General
Engine
Tires
Dimensions
Transmission
PTO
Hydraulic System
BL150 Loader
| Drive System | 4 Wheel Drive |
| Steering | Hydrostatic |
| Clutch | Dry Single Plate |
| Battery | 12V |
| Brake | Wet Disc |
| Model | A2300NA4 |
| Type | Vertical, 4 Cycle, Water Cooled, Diesel |
| Combustion System | Swirl Chamber |
| Aspiration | Natural |
| HP | 48 |
| RPMs | 2600 |
| No. of Cylinders | 3 |
| Bore x Stroke | 88 X 94 mm (3.46″ x 3.7″) |
| Displacement | 2286 cc |
| Compression Ratio | 21.3:1 |
| Air Cleaner Type | Dry, Element |
| Fuel Capacity | 7 gal |
| Front Tread | 7 x 6 (AG10), 28 x 8.50 -15 (IND10) |
| Rear Tread | 12.4 x 28 (AG10), 43 x 16-20 (IND10) |
| Overall Length | 121.9 in. |
| Overall Width | 57 in. |
| Height with ROPS | 104.06 in. |
| Wheelbase | 65.79 in. |
| Ground Clearance | 13.9 inches |
| Weight | 3014 lbs |
| Type | Hydro Max |
| Gear Shifting (F&R) | HST x 3 Range |
| Travel Speed (F&R) | 14.8 mph |
| Type | 540 / 780 (540E) |
| Speed | Independent PTO (6 Spline Shaft) |
| Power | 40 hp |
| Type | Position Control |
| 3-Point Hitch | Category 1 |
| Lift Capacity | On ball ends- (3306 lbs) at 24″ (2420 lbs) |
| Steering Pump Flow | 4.7 gpm @ 2600 rpm |
| Main Pump Flow |
8.7 gpm @ 2600 rpm |
Included Attachments
BL150 Loader 
Dig with Authority!
Branson Loaders are designed with the operator in mind. It is easy and quick to attach and detach them from the tractor. Loaders are powered by the tractors’ hydraulics, no need to struggle hooking up an auxiliary hydraulic pump.
Specifications
| Maximum Lift Height | 104 in |
| Clearance with Attachment Level | 95 in |
| Clearance with Attachment Dumped | 78.2 in |
| Reach at Maximum Height | 20.4 in |
| Reach with Attachment on Ground | 70.5 in |
| Maximum Dump Angle | 46 degrees |
| Attachment Rollback Angle | 35 degrees |
| Digging Depth Below Grade | 1.8 in |
| Overall Height in Carry Position | 52.4 in |
| Depth of Attachment (to back of inner shelf) | 20.9 in |
| Height of Attachment | 20.9 in |
| Depth of Attachment (to pivot pin) | 27.2 in |
| Lift Capacity to Full Height @ Pivot Pins | 2200 lbs |
| Breakout Force | 3660 lbs |
| Relief Valve Setting (loader control valve)2532 | psi |
| Lift Cylinders | 2.2 x 1.2 in |
| Bucket Cylinder | 2.0 x 1.2 in |
| Bucket Specification | 50 in |
Our brands
