BEST ZERO-TURN VALUE IN THE INDUSTRY.  STILL LOADED WITH PREMIUM FEATURES.

ARIENS IKON X 52 Premium 24HP/725cc Kohler 7000 Series OHV Engine

Features:

• Overhead valve design for better fuel economy and top performance
• Full-pressure lubrication system with full-flow filter
• Dual Hydro-Gear™ EZT Hydrostatic Drive System
• Fan cooled 10cc pumps and wheel motors on each drive wheel
• No shifting necessary for effortless operation
• 52-Inch, 3-Blade Fabricated Mower Deck
• 11-gauge steel deck design
• 4 support positions prevent excess deck movement
• Mechanical foot lift raises and lowers mowing deck
• Best In Class Dial Height Of Cut Selector
• Select 1 of 13 cutting positions in 1/4” increments with the turn of a dial
• Cutting height range of 1.5” to 4.5”
• Fully Tubular 3-Inch Frame
• Welded joints provide structural rigidity for added strength and stability
• Fully Adjustable Control Arms
• Adjust in three different directions to accommodate the operator
• Plush High-Back Seat With Arm Rests
• Seat springs for added comfort and lumbar support

COMMERCIAL-STYLE DECK
A 4½” deep fabricated and welded deck provides durability and maximum airflow in challenging conditions to create a precise cut.

FULL TUBULAR FRAME
The fully tubular steel frame rails are strong and more resistant to stresses, to support loads of the machine with unprecedented strength and stability.

PADDED SEAT WITH ARMRESTSPlush, adjustable high-back seat with armrests provides a comfortable and more ergonomic ride even during longer use.

DIAL-OPERATED CUT HEIGHT
|
Choose from 13 cutting positions, from 1½” to 4½”, in quarter-inch increments with just the turn of a dial.

4-POINT HANGING DECK

Commercial-style deck suspension creates a more level cut when going over uneven terrain.

SPECS:

GENERAL

MODEL NUMBER

915222

GROUND SPEED (APPROXIMATE MPH) (FWD/REV)

7mph/3mph

FUEL CAPACITY

2.8 Gallon (10.5L)

WEIGHT

635 lbs

LENGTH

77.5 in

WIDTH

63.4 in

HEIGHT

40.9 in

ENGINE

ENGINE
Kohler V-Twin 7000 Series 

HORSEPOWER
24 hp

DISPLACEMENT (CC)
725cc

DRIVE SYSTEM

Hydro-Gear® EZT Transaxles

DECK

DECK MATERIAL

10ga

DECK CONTRUCTION

Fabricated

NUMBER OF SPINDLES

3

BLADE TIP SPEED (FPM)

17,000

SPINDLE MATERIAL

Steel

SPINDLE SHAFT

Steel

DECK DRIVE

Belt

DECK ENGAGEMENT

Electric Warner®

DECK LIFT SYSTEM

Foot Operated, Dial Selection

CUTTING WIDTH

52 in

CUTTING HEIGHTS

1.5-4.5 in

CUTTING POSITIONS

13

WHEELS

WHEELS (FRONT)

11 x 4 in - 5 in

WHEELS (REAR)

18 x 8.5 in - 8 in

SEAT

High Back Comfort w/ Seat Springs, Lever Adjust, Arm Rests

HOUR METER

Standard

WARRANTY

WARRANTY (MACHINE)

3 Year Limited Consumer

*WARRANTY (DECK & FRAME)

5 Year Limited